ZYLIA ZM-1S PRO Set

    6,000.00 6,000.00 6000.0 USD

    24,999.00 zł

    This combination does not exist.

    Add to Cart

    ZYLIA ZM-1S PRO Set:
    - ZYLIA ZM-1S microphone array with timecode input channel
    - ZYLIA Studio PRO plugin
    - ZYLIA Ambisonics Software Package


    ZYLIA ZM-1S PRO Set

    ZYLIA ZM-1S - the 3rd order Ambisonics microphone array with 19 calibrated capsules (MEMS sensors), high-end 24-bit recording resolution and timecode input channel allowing for synchronization of multiple ZM-1S microphones.  

    Main features of the microphone: ​

    • High quality 360 audio recording - 3rd order Ambisonics

    • ​19 microphone omnidirectional digital MEMS capsules distributed on a sphere

    • Timecode input channels

    • Multiple ZM-1S timecode synchronization

    • ​LED ring status indicator informing about recording status

    • 48 kHz / 24 bit recording

    • USB connectivity making the process of recording easy

    • Recording -  ZYLIA Studio PRO plugin, ZYLIA 6DoF VR/AR software or any DAW (Digital Audio Workstation) 


    Timecode input

    It allows for synchronization of multiple ZM-1S microphones as well as other devices connected to recording system such as video cameras.

    Timecode input specification:

    • Act as slave device

    • Audio line input

      • Full-Scale voltage input (single-ended): 2.1 VRMS

      • ADC sampling rate: 48 kHz

      • ADC bit resolution: 24 bit

    • Timecode support:       

      • SMPTE Timecode Rates: 23.98, 24, 25, 29.97, 29.97DF and 30 FPS

      • General audio

    Support for multiple ZM-1S recording system (ZYLIA 6DoF VR/AR set)

    ZM-1S contains a dedicated chip that allows for the connection of multiple ZM-1S through the USB interface in a single computer. That is, signals from multiple ZM-1S microphones can be aggregated and stream through a single USB interface. It is possible to connect around 20 ZM-1S to a single USB 2.0 interface. However, if a computer has more USB controllers then it is possible to aggregate more signals. In that case, the only limit for connecting ZM-1S is hard disk speed. For modern SSD disks, it should be possible to record more than 150 ZM-1S connected to a single computer.

    Typically, each USB port on laptops has a dedicated USB controller.

    Technical parameters

    General

    Number of microphones

    • 19 digital MEMS sensors

    Timecode input channels

    • 1 audio input (Jack 3.5 mm)

    Timecode input  specification

    • Act as slave device

    • Audio line input

      • Full-Scale voltage input (single-ended): 2.1 VRMS

      • ADC sampling rate: 48 kHz

      • ADC bit resolution: 24 bit

    Timecode support

    • SMPTE Timecode Rates: 23.98, 24, 25, 29.97, 29.97 DF and 30 FPS

    • General audio

    Multiple ZM-1S timecode synchronization

    • Yes

    Support for Multiple ZM-1S recording system (ZYLIA 6DoF VR/AR set)

    • ​Yes

    ​Dimensions (including stand)

    • height - 155 mm (6.1’’)

    • length - 103 mm (4’’)

    • weight - 470 g (16.6 ounces)

    Connection with computer

    • USB 2.0 (type A) to microUSB 2.0 (type B)

    Supply voltage

    • 5 V DC (from USB)

    Current and/or power

    • max. 0.5 A  2.5 W

    • 0,15 – 0,26 A (+/- 0,01 A)


    Microphones specification

    Frequency range

    • 20 – 20 000 Hz

    Dynamic range

    • 105 dB

    Signal to noise ratio (SNR)

    • 69 dB(A)

    Total harmonic distortions (THD)

    • <1% up to 128dB SPL

    Acoustic overload point

    • 130 dB SPL

    Directivity

    • omnidirectional

    Noise floor

    • -105 dB FS(A)


    A/D conversion

    ​Sample rate

    • 48 kHz

    Bit resolution

    • 24-bit

    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products